Download Passport USB Interface (COM4) Driver

  



Download Passport USB Interface (COM4) DriverDownload passport usb interface (com4) driver downloadDownload Passport USB Interface (COM4) Driver

The driver is loaded based on a compatible ID match similar to other USB device class drivers included in Windows. USB Class02 If you want to load Usbser.sys automatically, set the class code to 02 and subclass code to 02 in the Device Descriptor.

Download Passport Usb Interface (com4) Driver Free

TS-990S, TS-890S, TS-590SG, TS-590S, TH-D72A/E
KPG-22U, KPG-46U, KPG-186U
Virtual COM Port Driver		Last updated : August 21, 2019
Introduction
Thank you for choosing the KENWOOD transceivers. You can connect your TS-990S, TS-890S, TS-590SG, TS-590S, or TH-D72A/E to a PC via a USB cable, or you can connect your TH-K20A/E, TH-K40A/E, TM-281A/E, TM-481A, or other transceivers to a PC via the KPG-22U/46U/186U programming cables by installing the virtual COM port driver in the PC, and then utilize the Radio Control Program, Memory Control Program, or other software we have provided.
This virtual COM port driver installation program is provided by Silicon Laboratories Inc.
After reading through the following explanations, feel free to download and install the software.
Operating Environment
1.Operating System (OS)
Windows® 7 (32-bit or 64-bit)
Windows® 8.1 (32-bit or 64-bit)
Windows® 10 (32-bit or 64-bit)
2.Peripheral Devices
USB 2.0 interface.
Installing the virtual COM port driver
ATTENTION: Do not connect the device to a PC before installing the virtual COM port driver.
Extract the downloaded file ('CP210x_Windows_Drivers.zip' for Windows® 7/8.1, or 'CP210x_Universal_Windows_Driver.zip' for Windows® 10) into a designated folder.In the designated folder, a folder labeled 'CP210x_Windows_Drivers' or 'CP210x_Universal_Windows_Driver' will be created.
In the created folder, double click the 'Cp210xVCPInstaller_x86.exe' with 32-bit OS, or the 'Cp210xVCPInstaller_x64.exe' with 64-bit OS, and follow the instructions that appear on the display to install the virtual COM port driver.
Connecting the device to a PC
Turn the transceiver power ON, then connect it to a PC via a connection cable for the transceiver. The PC will detect new hardware.
The installation of the device driver software will start automatically.
If a reboot request appears, please reboot the PC.
Confirming the COM port number
Open the 'Device Manager' to confirm which COM port number is assigned for connection with the device.
(Confirm the COM port number after turning on the transceiver and connecting the transceiver to the PC using a USB cable, or after connecting the KPG-22U/46U/186U to the PC.)
For Windows® 7
1. Click the Windows® [Start] button.
2. Right-click [Computer], then click [Properties].
3. Click [Device Manager] in the displayed window.
4. [Device Manager] window will appear.
For Windows® 8.1 and Windows® 10
1. Right-click the Windows® [Start] button.
2. Click [Device Manager] in the displayed window.
3. [Device Manager] window will appear.
Click “Ports (COM & LPT)” to extend it, then you can find “Silicon Labs CP210x USB to UART Bridge (COMxx)”.The “COMxx” number is different depending on your PC.
In the above example, “Silicon Labs CP210x USB to UART Bridge (COM3)” is listed. This means that COM3 is assigned for the connection with the transceiver.
Select this port number in the configurations for communication in the software you are using.
Note:
When connecting a TS-890S transceiver to the PC, 2 virtual COM ports are assigned as follows.
In the TS-890S Menu settings, these 2 virtual COM ports are defined as [Virtual 'Standard' COM Port] and [Virtual 'Enhanced' COM Port].
These 'Standard' and 'Enhanced' virtual COM ports are distinguished as follows.
•Double-click on these in the Device Manager to display the respective Properties windows.
•Select the 'Details' tab and then select 'Location Paths' (or 'Rutas de acceso de ubicación':Español, 'Chemins d'accès des emplacements':Français, 'Speicherortpfade':Deutsch, 'Percorsi':Italiano, 'Locatiepaden':Nederlands) from the Property drop-down menu.
•Move the mouse cursor to the line displayed in the 'Value' column (the top line if multiple lines are displayed) and check the number in the parenthesis on the right end of the character string.
The port displayed with the number (1) is the virtual COM (Standard) port of the transceiver.
In the display example above, the virtual 'Standard' COM port is assigned to COM3.
The port displayed with the number (2) is the virtual COM (Enhanced) port of the transceiver.
In the display example above, the virtual 'Enhanced' COM port is assigned to COM4.
Please also refer to the TS-890S Instruction manual for details.
If you agree with the details listed above, click one of the following links corresponding to each OS to download the virtual COM port driver installation program.
For Windows® 7/8.1：
'CP210x_Windows_Drivers.zip'(v6.7.6) 6.83MB download
For Windows® 10：
'CP210x_Universal_Windows_Driver.zip'(v10.1.8) 878KB download
You can also download the latest and earlier versions virtual COM port driver installation program from the Silicon Laboratories website. (The URL link is subject to change.).
Microsoft®, Windows®, and Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries.
  • Attach the WD My Passport hard drive to your Mac computer.
  • Click the magnifying glass icon (Spotlight) and type Disk Utility. Select the Disk Utility program from the search result list.
  • The Mac Disk Utility window appears.
  • Make sure that the WD My Passport Ultra is selected on the left-hand side panel.
  • Click the Erase tab. Select 'ExFAT' from the drop-down list. (Using this format lets you connect this WD drive to a Windows or Mac computer.)Click Erase.
  • The 'Untitled' drive should appear on the desktop. If not, click the Finder icon on the dock, and the Untitled drive will be displayed in the 'Devices' section. Rename it and use it just like you would use a USB stick.
  • If you need to use this WD My Passport drive on your Mac computer extensively, follow these steps.
  • Go to Disk Utility and click the Erase tab. Choose the 'Mac OS' option from the 'Format' drop-down list. Click the Partition tab and click the + icon to partition the drive. Clicking it multiple times creates many partitions.
  • Click on - to delete a partition. Click a partition and type the size of the partition in the 'Size' field to set the partition size manually. Type a partition name that you can understand easily. (For example, type photos for the partition where you want to store photos.)
  • Set the format type as 'Mac OS(Journaled)' and then, click Apply Partition. Wait until the partition operation is completed. The partitions now appear on the desktop.

Download Passport Usb Interface (com4) Driver Download

  • This page shows a list of downloadable files for the Active USB-COM Port Driver of DENSO WAVE’s automatic data capture devices. DENSO WAVE serves as a leader in developing and manufacturing automatic data capture devices for QR codes and IC cards and industrial robots (FA equipment), etc.
  • Installing the virtual COM port driver ATTENTION: Do not connect the device to a PC before installing the virtual COM port driver. Extract the downloaded file ('CP210xWindowsDrivers.zip' for Windows ® 7/8.1, or 'CP210xUniversalWindowsDriver.zip' for Windows ® 10) into a designated folder.In the designated folder, a folder labeled 'CP210xWindowsDrivers' or 'CP210xUniversalWindows.
  • User Manuals, Windows Drivers: Download: USB-RJC2 2 files 1421 downloads Windows Drivers: USB 2.0 Extender Over Network Cable (300-FT) Windows XP-32/64 / Windows 7-32/64: Windows Drivers: Download: USB-KCPD 1 files 727 downloads User Manuals: 2-Port USB Type-C KVM Switch: User Manuals: Download: USB-HDMI 2 files 19640 downloads Mac Drivers.